An Ontology level is needed XML Ontology 256 imports Ontologies add • Structure • Constraints • mappings imports XML Ontology 1 XML Ontology 42 = <> We need a way to define ontologies in XML So we can relate them So machines can understand (to some degree) their meaning
View full slide show




Time Barbie Tootle Hayes Cape Cartoon Room I Cartoon Room II Suzanne M. Scharer Rosa M. Ailabouni Monday Aug 5th, 2013 10:10-11:50 A1L-A Analog Circuits I Chr: Ming Gu, Shantanu Chakrabartty Track: Analog and Mixed Signal Integrated Circuits A1L-B Low Power Digital Circuit Design Techniques A1L-C Chr: Joanne Degroat Student Contest I Track: Digital Integrated Chr: Mohammed Ismail Circuits, SoC and NoC Track: INVITED ONLY A1L-D Design and Analysis for Power Systems and Power Electronics Chr: Hoi Lee, Ayman Fayed Track: Power Systems and Power Electronics A1L-E Design and Analysis of Linear and Non-Linear Systems Chr: Samuel Palermo Track: Linear and Non-linear Circuits and Systems A1L-F Emerging Technologues Chr: Khaled Salama Track: Emerging Technologies Monday Aug 5th, 2013 13:10-14:50 A2L-A Analog Circuits II Chr: Ming Gu, Shantanu Chakrabartty Track: Analog and Mixed Signal Integrated Circuits A2L-B Low Power VLSI Design Methodology Chr: Genevieve Sapijaszko Track: Digital Integrated Circuits, SoC and NoC A2L-C Student Contest II Chr: Sleiman Bou-Sleiman Track: INVITED ONLY A2L-D Power Management and Energy Harvesting Chr: Ayman Fayed, Hoi Lee Track: Power Management and Energy Harvesting A2L-E Oscillators and Chaotic Systems Chr: Samuel Palermo, Warsame Ali Track: Linear and Non-linear Circuits and Systems A2L-F Bioengineering Systems Chr: Khaled Salama Track: Bioengineering Systems and Bio Chips A4L-A Analog Design Techniques I Chr: Dong Ha Track: Analog and Mixed Signal Integrated Circuits A4L-B Imaging and Wireless Sensors Chr: Igor Filanovsky Track: Analog and Mixed Signal Integrated Circuits A4L-C Special Session: Characterization of Nano Materials and Circuits Chr: Nayla El-Kork Track: SPECIAL SESSION A4L-D Special Session: Power Management and Energy Harvesting Chr: Paul Furth Track: SPECIAL SESSION A4L-E Communication and Signal Processing Circuits Chr: Samuel Palermo Track: Linear and Non-linear Circuits and Systems A4L-F Sensing and Measurement of Biological Signals Chr: Hoda Abdel-Aty-Zohdy Track: Bioengineering Systems and Bio Chips B2L-A Analog Design Techniques II Chr: Valencia Koomson Track: Analog and Mixed Signal Integrated Circuits B2L-B VLSI Design Reliability Chr: Shantanu Chakrabartty, Gursharan Reehal Track: Digital Integrated Circuits, SoC and NoC B2L-D B2L-C Special Session: University and Delta-Sigma Modulators Industry Training in the Art of Chr: Vishal Saxena Electronics Track: Analog and Mixed Signal Chr: Steven Bibyk Integrated Circuits Track: SPECIAL SESSION B2L-E Radio Frequency Integrated Circuits Chr: Nathan Neihart, Mona Hella Track: RFICs, Microwave, and Optical Systems B2L-F Bio-inspired Green Technologies Chr: Hoda Abdel-Aty-Zohdy Track: Bio-inspired Green Technologies B3L-A Analog Design Techniques III Chr: Valencia Koomson Track: Analog and Mixed Signal Integrated Circuits B3L-B VLSI Design, Routing, and Testing Chr: Nader Rafla Track: Programmable Logic, VLSI, CAD and Layout B3L-C Special Session: High-Precision and High-Speed Data Converters I Chr: Samuel Palermo Track: SPECIAL SESSION B3L-D B3L-E Special Session: Advancing the RF/Optical Devices and Circuits Frontiers of Solar Energy Chr: Mona Hella, Nathan Neihart Chr: Michael Soderstrand Track: RFICs, Microwave, and Track: SPECIAL SESSION Optical Systems B5L-A Nyquist-Rate Data Converters Chr: Vishal Saxena Track: Analog and Mixed Signal Integrated Circuits B5L-B Digital Circuits Chr: Nader Rafla Track: Programmable Logic, VLSI, CAD and Layout B5L-C Special Session: High-Precision and High-Speed Data Converters II Chr: Samuel Palermo Track: SPECIAL SESSION B5L-D Special Session: RF-FPGA Circuits and Systems for Enhancing Access to Radio Spectrum (CAS-EARS) Chr: Arjuna Madanayake, Vijay Devabhaktuni Track: SPECIAL SESSION B5L-E B5L-F Analog and RF Circuit Memristors, DG-MOSFETS and Techniques Graphine FETs Chr: Igor Filanovsky Chr: Reyad El-Khazali Track: Analog and Mixed Signal Track: Nanoelectronics and Integrated Circuits Nanotechnology C2L-A Phase Locked Loops Chr: Chung-Chih Hung Track: Analog and Mixed Signal Integrated Circuits C2L-B Computer Arithmetic and Cryptography Chr: George Purdy Track: Programmable Logic, VLSI, CAD and Layout C2L-C Special Session: Reversible Computing Chr: Himanshu Thapliyal Track: SPECIAL SESSION C2L-D Special Session: Self-healing and Self-Adaptive Circuits and Systems Chr: Abhilash Goyal, Abhijit Chatterjee Track: SPECIAL SESSION C2L-E Digital Signal Processing-Media and Control Chr: Wasfy Mikhael, Steven Bibyk Track: Digital Signal Processing C2L-F Advances in Communications and Wireless Systems Chr: Sami Muhaidat Track: Communication and Wireless Systems C3L-A SAR Analog-to-Digital Converters Chr: Vishal Saxena Track: Analog and Mixed Signal Integrated Circuits C3L-B Real Time Systems Chr: Brian Dupaix, Abhilash Goyal Track: System Architectures C3L-C Image Processing and Interpretation Chr: Annajirao Garimella Track: Image Processing and Multimedia Systems C3L-D Special Session: Verification and Trusted Mixed Signal Electronics Development Chr: Greg Creech, Steven Bibyk Track: SPECIAL SESSION C3L-E Digital Signal Processing I Chr: Ying Liu Track: Digital Signal Processing C3L-F Wireless Systems I Chr: Sami Muhaidat Track: Communication and Wireless Systems C5L-A Wireless Systems II Chr: Sami Muhaidat Track: Communication and Wireless Systems C5L-B System Architectures Chr: Swarup Bhunia, Abhilash Goyal Track: System Architectures C5L-C Image Embedding Compression and Analysis Chr: Annajirao Garimella Track: Image Processing and Multimedia Systems C5L-D Low Power Datapath Design Chr: Wasfy Mikhael Track: Digital Integrated Circuits, SoC and NoC C5L-E Digital Signal Processing II Chr: Moataz AbdelWahab Track: Digital Signal Processing C5L-F Advances in Control Systems, Mechatronics, and Robotics Chr: Charna Parkey, Genevieve Sapijaszko Track: Control Systems, Mechatronics, and Robotics Monday Aug 5th, 2013 16:00-17:40 Tuesday Aug 6th, 2013 10:10-11:50 Tuesday Aug 6th, 2013 13:10-14:50 Tuesday Aug 6th, 2013 16:00-17:40 Wednesday Aug 7th, 2013 10:10-11:50 Wednesday Aug 7th, 2013 13:10-14:50 Wednesday Aug 7th, 2013 16:00-17:40 B3L-F Carbon Nanotube-based Sensors and Beyond Chr: Nayla El-Kork Track: Nanoelectronics and Nanotechnology 5
View full slide show




MEMOS MERCHANDISE & SERVICES RECEIVED BY ITCC THROUGH JUNE 30 Entry on FAAINVE Encumbrance exists in FY 2013-14 Calendar date June 1 - June 30 Pay against encumbrance with June transaction date Calendar date July 1 – July 8 Pay against encumbrance with June transaction date Merchandise & services 30 Encumbrance exists in FY 2014-15 No Encumbrance Reduce encumbrance with Pay as a direct pay July transaction date; then with June received by ITCC through June pay as direct pay with transaction date June transaction date Reduce encumbrance with July transaction date; then pay as direct pay with June transaction date Pay as a direct pay with June transaction date Rolled encumbrance or new encumbrance created in FY 2014-15 No Encumbrance Reduce encumbrance with July transaction date; then pay as direct pay with June 30 transaction date Pay as a direct pay with June 30 transaction date Pay against encumbrance with July transaction date/ Reverse FT1 JV with July transaction date. Pay as a direct pay with July transaction 26 date/Reverse FT1 JV with July transaction date. July 11: Encumbrance roll to FY 2014-15 Entry on FAAINVE Encumbrance no longer exists in FY 2013-14 (Central Office only) Calendar date July 14 & later (Regions) Calendar date July 14 & later If material amount, create FT1 JV with June 30 transaction date to accrue expense & liability
View full slide show




Date object constructor for date 7/24/1949 Date object constructor for date 3/12/1988 Employee object constructor: Bob Jones Jones, Bob Hired: 3/12/1988 Birth date: 7/24/1949 Test Date constructor with invalid values: Month 14 invalid. Set to month 1. Day 35 invalid. Set to day 1. Date object constructor for date 1/1/1994 Date object destructor for date 1/1/1994 Employee object destructor: Jones, Bob Date object destructor for date 3/12/1988 Date object destructor for date 7/24/1949 Date object destructor for date 3/12/1988 Date object destructor for date 7/24/1949 Outline Note two additional Datefig07_10.cpp objects constructed; no output output (1 of 1) since default copy constructor used. Destructor for host object Destructor Employee’s manager runsfor before member object hireDate. Destructor for Employee‘s destructors for member Destructor for Date member object birthDate. objects hireDate and object Destructor for Date object hire. birthDate. birth.  2003 Prentice Hall, Inc. All rights reserved. 31
View full slide show




But there are many schemas XML Schema file 1               XML Schema file 42 <speaker> <time> <location> <abstract> <biosketch> <host> after Frank van Harmelen and Jim Hendler
View full slide show




There’s no way to relate schema XML Schema file 1      XML Schema file 42     <speaker> <time> <location> <abstract>      Either manually or automatically. XML Schema is weak on semantics.
View full slide show




Breakout Sessions 1& 2-Please make one selection for each session Session 1 & note locationSession 2  WV Oral Health Coalition: Join the Movement Using Main Conference Room Main   Social Media the Basics   Perinatal Oral Health: Motivational Interviewing   Conference Room A/B Conference Room C Maintaining Positive Work Environment  Social Media to Promote Oral Health Hot Conference Room Top Topics & Trends Conference Room A/B Thinking Outside the Box of Traditional Dentistry Conference Room C Maintaining Positive Work Environment Conference Room D/E Conference Room D/E CPR  CPR (must have preregistered)  Conference Room F (must have preregistered) Conference Room F
View full slide show




A Use Case Scenario Is Divided into Three Sections (Figure 2.16) Use case name: Register for Conference UniqueID: Conf RG 003 Area: Conference Planning Actor(s): Participant Stakeholder Conference Sponsor, Conference Speakers Level Blue Description: Allow conference participant to register online for the conference using a secure Web site. Triggering Event: Participant uses Conference Registration Web site, enters userID and password, and clicks the logon button. Trigger type:  External  Temporal Steps Performed (Main Path) Information for Steps 1. userID, Password Participant logs in using the secure Web server More steps included here… 12. Successful Registration Confirmation Web page is sent to the participant Registration Record Confirmation Number Preconditions: Participant has already registered and has created a user account. Postconditions: Participant has successfully registered for the conference. Assumptions: Participant has a browser and a valid userID and password. Success Guarantee: Participant has registered for the conference and is enrolled in all selected sessions. Minimum Guarantee: Participant was able to logon. Requirements Met: Allow conference participants to be able to register for the conference using a secure Web site. Outstanding Issues: How should a rejected credit card be handled? Priority: High Risk: Medium Kendall & Kendall Prentice Hall Copyright © 2014 Pearson Education, Inc. Publishing as 2-44
View full slide show




CMTS Standing Committee and Sub-Committee • • • • There will be a standing CMTS Committee formed that will be comprised of members of the CMTS user community across campus. This group will meet monthly to discuss the workings of CMTS and to develop best practices to be utilized by the user community. The mission of the group will be to serve as a steward of the system and offer suggestions for enhancements to the system which could benefit the user community and the enterprise as a whole. The Director of Contracts Administration (CAD)will serve as the non-voting Committee Chair. Administrative/Clerical Support will be provided by IT and Contract Services Department. Within the CMTS Committee, a smaller Sub-Committee will be formed with four (4) members. Currently, one subcommittee will be established: CMTS Workflow and CMTS Enhancement/Change. Said subcommittee will be comprised of four (4) rotating voting members and one (1) permanent member. The rotating members will be selected from the full committee and serve terms that are staggered and the permanent non-voting member of the committee will be the Director of IT Systems Development or their delegate. The Director of Contracts Administration will serve as the non-voting Committee Chair. Administrative/Clerical Support will be provided by IT and Contracts Administration Department. 10/27/2016
View full slide show




One Approach • • • • • • • • • • • • • • Session 1 – Market Failure, Law and Ethical Analysis Session 2 - Truth and Disclosure Session 3 - Gifts, Side Deals, and Payoffs Session 4 - Whistle Blowing and Loyalty Session 5 – Agency and Fiduciary Duty Session 6 – Trade Secrets Session 7 – Control by Law Session 8 – Moral Standards Across Borders Session 9 – Product Liability Session 10- Sales and Marketing Session 11- Insider Trading Session 12- Workplace Rights Session 13- Right to Privacy Session 14- Responsibility to Stakeholders
View full slide show